Shop Our Best Sellers & New Arrivals
The Slingster® was developed to be the most modular rifle sling on the market. Its rapid adjust rubberized pull tab allows the ability to quickly transition your weapon from securely slung to combat ready.Updated with the new Ferro Concepts Slingster® Pull Tab which improves upon the previously used ITW Zipline Orbit pull tab. The no-hole design and enhanced ribbed grip offers greater traction with or without gloves. Injection molded from high quality flexible rubber that maintains a ready position for quick adjustment of your Slingster®. Mounted securely with a black stainless-steel fastener. Click here for the hardware options we have available. Features: Can be utilized in one point or two point configurations using the correct hardware Adjustable pad to maximize comfort Removable pad allowing the use of a plain Slingster® Open ended design gives user the choice of mounting hardware. (Hardware not included) Custom injection molded Slingster Pull Tab Custom welded steel common loop Made in the USA View Product Guide
The Single Point Slingster® was developed out of a need to have an adjustable padded sling on sub guns. There are some key differences between The Single Point Slingster® and the regular 2 point Slingster®. This sling can only be used in 1 point configuration. It features a narrower pad as well as a steel welded ring that allows smooth mobility of the weapon from dominant to non-dominant shoulder. The Single Point Slingster® does however have many of the same features as the 2 point Slingster®. It has a rapid action, rubberized pull tab that allows you to quickly actuate the metal Quick Release Buckle which gives you the ability to go from securely slung to combat-ready in seconds. Additionally, it still features the adjustable shoulder pad that you’ve come to know on the 2 point Slingster® Features: Adjustable pad to maximize comfort Removable pad allowing the use of a naked Slingster® Open ended tail design gives users the choice of mounting hardware. (Mounting hardware not included) Custom injection molded Slingster Pull Tab Custom welded steel common loop Made in the USA Click here for the hardware options we have available View Product Guide
The Naked Slingster® is similar to our Slingster® but with no pad for a more streamlined sling option. Its rapid adjust rubberized pull tab allows the ability to quickly transition your weapon from securely slung to combat ready. Updated with the new Ferro Concepts Slingster® Pull Tab which improves upon the previously used ITW Zipline Orbit pull tab. The no-hole design and enhanced ribbed grip offers greater traction with or without gloves. Injection molded from high quality flexible rubber that maintains a ready position for quick adjustment of your Slingster®. Mounted securely with a black stainless-steel fastener. Features: Can be utilized in one point or two-point configurations using the correct hardware Naked is in the title Open ended design gives user the choice of mounting hardware. (Hardware not included) Custom injection molded Slingster® Pull Tab Custom welded steel common loop Made in the USA Click here for the hardware options we have available View Product Guide
At this time, The Chem Cracker™ is available for Unit or Department purchasing only. Please contact govsales@ferroconcepts.com for inquiries. We are currently working diligently on getting this product to the consumer market. Please stay tuned to our newsletter. CLICK HERE FOR MORE INFORMATION ON THE CHEM CRACKER™ Gone are the days of ChemLight bundles flopping around your kit. The Chem Cracker™ offers a solution for deploying up to 13 - (1.5”) ChemLights instantly, right in the palm of your hand. Each ChemLight is cracked and dispensed individually with the press of a switch. With its sleek design and the use of a DCC Monoblock Gear Clip™, The Chem Cracker™ rides close to the body without taking up much space on your belt. Spring loaded feeder with a capacity of 13 - 1.5” ChemLights Cracks and dispenses 1.5” ChemLights directly into users hand Easy to press finger switch for quick access Side port for quickly loading ChemLights Includes a DCC Monoblock Gear Clip™ 1.5” Also compatible with the Bladetech Tek-Mount Mini Weight: 2.77 oz Made in USA
The Ferro X Pig (FDT) Delta FR Glove is a minimally designed glove that pays homage to the once loved Nomex Flight Glove. Featuring full-touch screen compatibility, and a high level of dexterity. Fold-over finger construction eliminates fingertip discomfort and the single-layer palm gives great tactile sensitivity. Additionally these gloves are constructed out of Nomex® flame resistant material. Made of flame resistant Nomex® material Full touch-screen compatibility Single-Layer palm for tactile sensitivity Paracord Pull Loop Elastic wrist for quick don and doff At the end of the day, the Ferro X PIG (FDT) Gloves are a consumable product that will provide the user with the best tactile dexterity available in a tactical glove, and should be worn to destruction, then discarded and replaced. The selection of super sensitive materials and extremely tight seams mean that these gloves will eventually wear out, and there are no warranties implied. Please try them on and inspect them thoroughly for fit and finish before removing from the hangtag, but be forewarned, you will not want to take them off. Delta Sizing Guide
The PIG Delta Gloves are a minimal glove designed from the ground up for gunfighters. Featuring full-touch screen compatibility, and a high level of dexterity. Fold-over finger construction eliminates fingertip discomfort and the single-layer palm gives great tactile sensitivity. Full touch-screen compatibility Single-Layer palm for tactile sensitivity Paracord Pull Loop Elastic wrist for quick don and doff At the end of the day, the PIG (FDT) Delta Gloves are a consumable product that will provide the user with the best tactile dexterity available in a tactical glove, and should be worn to destruction, then discarded and replaced. The selection of super sensitive materials and extremely tight seams mean that these gloves will eventually wear out, and there are no warranties implied. Please try them on and inspect them thoroughly for fit and finish before removing from the hangtag, but be forewarned, you will not want to take them off. Delta Sizing Guide
The PIG Alpha Gloves are designed from the ground up for gunfighters. Featuring flex joints for unhindered articulation, the Alpha Gloves won’t shift and twist while moving fingers. Durable materials provide breathability and protection with built-in 1000D padded knuckles and non-intrusive edge padding for added protection. Additionally, the Alpha Gloves are built with conductive material on the index finger and thumb so you can access devices you need without removing your gloves. Features: Conductive Thumb and Trigger Finger for use with touchscreen devices Palm designed to make perfect contact for your shooting grip Isolated trigger finger for maintaining a tactile feel while shooting Ventilated for breathability Low Profile hook closure Flexible joints for maximum dexterity Paracord pull loop 1000D padded knuckles and edge padding for protection At the end of the day, the PIG (FDT) Alpha Gloves are a consumable product that will provide the user with the best tactile dexterity available in a tactical glove, and should be worn to destruction, then discarded and replaced. The selection of super sensitive materials and extremely tight seams mean that these gloves will eventually wear out, and there are no warranties implied. Please try them on and inspect them thoroughly for fit and finish before removing from the hangtag, but be forewarned, you will not want to take them off. Alpha Solid Color Sizing Guide Alpha Multicam Sizing Guide
The new Ferro Concepts Slingster® Pull Tab improves upon the previously used ITW Zipline Orbit pull tab. The no-hole design and enhanced ribbed grip offers greater traction with or without gloves. Injection molded from high quality flexible rubber that maintains a ready position for quick adjustment of your Slingster®. Mounts securely with a black stainless-steel fastener. Features: Injection molded Enhanced ribbed grip Compatible with The Slingster® Flexible rubber design Made in the USA Kit Includes: Pull Tab Bolt 2 allen wrenches Instructions View Product Guide
The perfect addition to your Slingster™ or any sling with 1" webbing. The release button on the swivel comes flush to the swivel body, virtually eliminating the chance for errant release of the swivel. Allows use of MASH or HK style CLASH hooks in push button base. Pull tested up to 450 pounds of pressure. Non-Reflective Manganese Phosphate Finish. Sold individually. Made in the USA Berry Compliant
Our M-lok® sling mount for QD Swivels attaches flawlessly to any Magpul M-lok® compatible slots. Provides a rugged, low profile, snag-proof, ultra lightweight and ergonomic attachment point for your sling with a QD sling swivel. Sling swivel rotation is limited to allow proper positioning of the sling as the weapon is transitioned between the firing and carrying position, preventing sling wrap-ip and twist. Accepts all push button quick detach sling swivels. Attaches to Magpul M-lok® compliant slots. No gunsmithing and simple installation without removing the handguard. Ultra-light design weighs only 0.314 ounces. CNC machined from 6061-T6 aluminum; Type III Mil-Spec anodized. Lifetime warranty Made by an M-lok® licensee for Ferro Concepts. Made in the USA
Our Picatinny rail sling mount for QD Swivels provides an adjustable 45 degree mount to attach our Slingster®. Features: Unique 45 degree offset design places the push button quick detach sling Swivel as close to the centerline of the weapon as possible. Rotation is limited to allow proper positioning of the sling between the firing and carrying position. Prevents sling wrap-up and twist. Accepts all heavy duty or standard push button quick detach sling swivels. Ambidextrous mounting. Attaches to any slots on a Picatinny MIL-Spec 1913 or STANAG Rail. Sling mount supports weights of up to 250 lbs. Ultra-light design at 0.643 ounces. CNC machined from 6061-T6 aluminum; Type III Mil-Spec anodized. Made in USA Berry Compliant
The 2 To 1 Point Triglide can replace the rear plastic Triglide on the Slingster™ to rapidly convert to a One Point Sling. Works with either the QD Swivels or Steel Sling Hook 1" . When extra maneuverability is required quickly switch to single point, then back to a two point for extra stability or when carrying the weapon. The 2 To 1 Point Triglide allows you to leverage the best of both sling types. CNC machined from Billet 6061-T6 aluminum. Hard anodized Type III per MIL-A-8625F US Patents D685445, D7171391 Made in the USA Berry Compliant
Our AR buffer tube end plate sling mount for QD Swivels swaps out the stock AR buffer tube end plate. It is perfect for use with our Single Point Slingster on any AR pistol or customized 2 point set up. Made in USA
The ULoop™ brings a level of versatility that is unmatched by any other sling hardware. Codenamed the “Uber Loop” it is a quick-detach version of Blue Force Gear's popular Universal Wire Loop, offering even faster and easier installation, especially on smaller eyelets found on HK, SIG and FN weapons. The ULoop can be installed almost anywhere - through eyelets, holes in railed handguards, Mlok slots, and on KeyMod rails. There’s no need to have multiple sling attachments. The ULoop replaces all hooks, clips and connections. 1" webbing sized for The Slingster® Nylon coated aircraft-grade stainless steel wire Mil spec ball shank ends crimped to the wire, not the nylon coating Glass reinforced DuPont Zytel® Nylon body Made in the USA Berry Compliant
Designed to meet the needs of rifle sling applications that require a quick-on feature with a spring loaded retention gate. The body is made from steel and has a slot designed to accept 1” webbing from slings. Made in the United States
Our SIG M17/M18 Titanium Plates are designed to solve the issue of loose tolerances on the factory SIG Sauer optics plates. Machined with precision out of 6al-4v Titanium, this plate sits tightly in the optic pocket and also provides ample support for the optic. Tight tolerances paired with quality mounting hardware means that you’ve got a solution that will remain durable even under hard use conditions. Compatibility: Trijicon RMR, Trijicon SRO, Holosun 507T/508T/507 Comp / Aimpoint ACRO P1/P2, Lead & Steel PB-3, Steiner MPS Designed for the Military-Issue Sig Sauer M17/M18 Rear dovetail cutout for rear irons on the plate Precision tolerances Made of 6al-4v Titanium Durable clear anodizing Will never rust No Sealing Plate Needed Mounting Hardware and Vibratite included Made in the USA We recommend the Trijicon SG201-C-600907 Iron Sights or similar. Note: These optic plates are designed specifically for the Military-issued Sig Sauer M17 and M18 pistols which can differ from the civilian models. Due to the large variety of Sig Sauer optic cut patterns, please verify that your pistol is compatible with these plates (reference image found here). If you have any questions please reach out to info@ferroconcepts.com
