Shop Our Best Sellers & New Arrivals
Perfect for those who use the AR rifle platform in a Law Enforcement or Military occupations. The KTAR includes three Haley Strategic MP2 magazine retention inserts with a click-in design. This allows the end user to "insert magazines "bullets front" or "bullets back" and delivers a smooth draw of a fresh source without impacting the ability to quickly retain partial magazines in the case of a tac reload". The KTAR front flap includes retention bungees and the S&S Pull Tabs which are removable if open top is needed. The main body is laser cut from 500D laminate Cordura. All ADAPT front flaps are designed to work directly with The Slickster, Chesty Rig, FCPC and a wide range of carriers on the market. This system offers mission flexibility allowing rapid attach/detach of the front flaps using the G Hooks and Velcro. *Magazines not included Compatible with all of our Carriers and Chest Rigs 3 - HSP Ferro MP2 magazine retention inserts 3 - S&S Pull tabs and shock cord retention Ferro Concepts low-profile G-hook attachment Made in USA Berry Compliant
The Triple Elastic AR (TEAR) Front Flap is an extremely low profile and quick draw option for carrying three AR magazines. The elastic pouches offer a positive retention on the magazines. The TEAR front flap includes retention bungees and the S&S Pull Tabs which are removable if open top is needed. All ADAPT front flaps are designed to work directly with The Slickster, Chesty Rig, FCPC and a wide range of carriers on the market. This system offers mission flexibility allowing rapid attach/detach of the front flaps using the G Hooks and Velcro. Compatible with all of our Carriers Fits magazines for 5.56x45 / .223 / 7.62x39 When using AK magazines we recommend the use of PMAGs only for abrasion Berry Compliant Made In USA
The MOLLE Front Flap offers an extremely low profile option for adding any MOLLE compatible pouches. All ADAPT front flaps are designed to work directly with The Slickster, Chesty Rig, FCPC and a wide range of carriers on the market. This system offers mission flexibility allowing rapid attach/detach of the front flaps using the G Hooks and Velcro. Compatible with all of our Carriers Made in the USA Berry Compliant
The KANGAROO Front Flap was designed to use our magazine inserts (KTS/Turnovers) while allowing MOLLE compatible pouches to be attached to the front. All ADAPT front flaps are designed to work directly with The Slickster, Chesty Rig, FCPC and a wide range of carriers on the market. This system offers mission flexibility allowing rapid attach/detach of the front flaps using G Hooks and Velcro. Compatible with all of our Carriers Made in the USA Berry Compliant
The WINGMAN™ is the pouch that most armor carriers are missing! Designed to accept large body personal radios, up to two AR magazines, medical supplies, and much more. The pouch is constructed from 4" MIL-SPEC elastic to ensure items are kept secure. Velcro brand hook and loop makes it easy to attach under the cummerbund of most armor carriers. Sold as a set of two (1 left and 1 right). Includes S&S Precision pull tabs and shock cord for increased item retention if required. Compatible with the MPU4, MPU5, Silvus SC4200, AN/PRC-163, AN/PRC-152, AN/PRC-148, XTS5000, APX Series with NNTN7037/NNTN8921 battery Adjustable Retention Made in the USA
The MOLLE Admin Pouch provides extra storage and organization of essentials. A large zipper opening with dual zipper pulls allows for easy access to contents yet doesn’t allow items to fall out easily. Equipped with our laser-cut 500D Cordura® laminate MOLLE straps with ridged tuck tabs to provide secure attachment to any MOLLE compatible interface while keeping weight and bulk down. Integrated into the 500D Cordura® laminate is a 2” slot for belt mounting to provide a broader spectrum of applications the pouch can be used for. The addition of a 4-way stretch woven panel allows for more wiggle room and expansion if needed. Internal organization includes a divider and elastic slots. Externally, two elastic loops have been provided on the bottom of the pouch for items such as pens and chem lights. If you want this for your Slickster and you are like "How do I put that sweetness on my Slickster", you just need the ADAPT ADMIN PANEL Belt compatible for up to 2" wide belts Compatible with all MOLLE with at least 2 rows high and 4 columns wide. Fits perfectly on the chest of the FCPC V5 Ambidextrous zipper opening Elastic for chem lights/pens Loop velcro for callsign patches Made in the USA
The ADAPT Admin Panel provides extra storage and organization of essentials to the chest of the Slickster Plate Carrier and other ADAPT compatible products. The Panels thermoplastic tabs secure into the vertical slots and adheres to the 4x6 Velcro loop panel of ADAPT products that include these features. A large zipper opening with dual zipper pulls allows for easy access to contents yet doesn’t allow items to fall out easily. The addition of a 4-way stretch woven panel allows for more wiggle room and expansion if needed. Internal organization includes a divider and elastic slots. Externally, two elastic loops have been provided on the bottom of the pouch for items such as pens and chemlights. Compatible with the Slickster Plate Carrier and DOPE Front Flap Ambidextrous zipper opening Elastic for chem lights/pens Loop Velcro for callsign patches Made in the USA View Product Guide
The ADAPT MOLLE Panel is a great way to add MOLLE to the chest area of The Slickster plate carrier. It is intended to allow the warfighter the use of smartphone technology and is fully compatible with both Kagwerks and Juggernaut Cases with their MOLLE mounts. It is made up of a thermoplastic composite that offers a safe and rigid MOLLE platform. The panel mounts with hook velcro and the wing tabs tuck into the laser slots on the chest to secure the corners. Only compatible with The Slickster that has the vertical Laser slots beside the loop velcro on the chest. It is not compatible with the old version Slickster with webbing. Compatible with The Slickster™ Compatible with The DOPE™ Front Flap Does not reflect under IR light/NOD Made in USA Berry Compliant View Product Guide
The Chesty ATAK Panel is a simple and secure way to integrate an ATAK device to the chest area of the Chesty Rig platform. The panel is constructed from a laser-cut thermoplastic and can be formed to user preference. Installation is simple with a hook and loop Velcro sandwich and elastic shock cord anchors. This expands the chesty platform vertically to provide a MOLLE interface and has uses beyond its primary intent, such as mounting our MOLLE Admin Panel. The body-side has loop Velcro to attach our soon to be released Kangaroo Insert - Half Pocket. Although designed with the Chesty Rig platform in mind, the panel may be compatible with other rigs. FEATURES: MOLLE platform designed for ease of use with an ATAK mount Compatible with all Ferro Concepts Chesty Rigs Does not reflect under IR light/NOD Body-side loop Velcro for mounting the Kangaroo Insert - Half Pocket Device, device case, and device mount are not included View Product Guide
The Knifenook™ is a wedge style knife mounting platform that allows the user to mount a knife in a variety of locations on a carrier. The Knifenook™ can be sandwiched in Kangaroo style pouches, under cummerbunds, behind front flaps or anywhere with sufficient hook and loop Velcro®. The hole/slot spacing fits a majority of kydex knife sheaths. Features: Constructed with rigid laser cut thermoplastic Fits a variety of sheaths up to 3.0” wide 0.5” vertical hole/slot spacing Sandwiches anywhere with sufficient hook and loop Kit Includes: 2x 1/4” Chicago screws Note: The supplied hardware may or may not work for your particular application. You may need to procure your own hardware.
The Wingthing™ is a universal mounting platform version of our popular Wingman™ pouch. Originally designed to provide a knife mounting solution to your carrier, the Wingthing™ is also MOLLE compatible and allows for the mounting of MOLLE pouches of your choosing. The rigid design provides a perfect platform to support most items, especially heavier items such as radios. The hole/slot spacing fits a majority of kydex knife sheaths. Use it on the side of your plate carrier or as a custom Dangler® setup. Feel free to use your imagination and adapt this platform to whatever you want. Attaches to most carriers with Velcro® Constructed with rigid laser cut thermoplastic Does not reflect under IR light/NOD MOLLE compatible mounting platform 0.5” hole/slot spacing Can be installed on the side or bottom of carrier Kit Includes: 4x 1/4” Chicago screws 4x rubber spacers 2x 11” zip ties Note: The supplied hardware may or may not work for your particular application. Because of the universal nature of this product, you may need to procure your own hardware.
Sometimes you just don’t have any space to spare. That’s where the DropWing™ comes in. Utilizing vertical MOLLE slots, the DropWing™ allows you to mount things like our SEAR or KSAR horizontally below your plate bag or cummerbund. Additionally, holes are placed along the DropWing™ to utilize the included shock cord/cord locks. This is great for retaining breaching charges or whatever else you can strap down! Creates space by running things like the SEAR or KSAR horizontally below plate bags and cummerbunds Can be ran with either hook forward or loop depending on need Ergonomic design allows the DropWing™ to flex when sitting or on a cummerbund Compatible with any armor carrier that has loop Velcro on the front or rear as well as any plate pockets that secure with hook and loop MOLLE spacing is two sections of 2x3 flipped on its side Includes 4 pieces of shock cord and 4 cord locks Weight: 1.64 oz Made in USA View Product Guide
The Hangboard™ is a one-row by six-column section of MOLLE that attaches to carriers just like The Dangler™ and The Mini Dangler™. Utilizing a 3”x9.25” section of hook and loop, The Hangboard can be tucked under front flaps or in the plate bags. Turn things like our 6x5 and 6x9 General Purpose Pockets into Danglers™ for some extra storage or secure things like door charges with some shock cord for quick access! You can think of The Hangboard™ as a universal Dangler™ adapter. Allows for running accessories as Danglers™ Can be run with either hook forward or loop depending on need Works as a platform for storing things like door charges Attaches in your plate bag or under your front flap Compatible with any armor carrier that has loop velcro on the front or rear as well as any plate pockets that secure with hook and loop The Retention Collection can be used to tie down items to The Hangboard™ Made in USA View Product Guide
Created for the FCPC but compatible with all carriers with a 2" strap, the Padded Strap Socks are a great low profile and sleek pad for adding communication routing and comfort to your plate carrier. Features: Fits 2" shoulder straps 4-way stretch woven body to accommodate hydration tubes, cables, and antennas 1/8" of padding provides additional comfort Mission adaptable 8.5" in length Includes both sides Made in the USA Berry Compliant Weight: 1.8 OZ
Ferro Concepts Shoulder Pads offer maximum comfort and breathability. These shoulder pads give multiple options for communication and hydration routing. Made from laser cut laminate with 1/4" foam and 3mm spacer mesh against the user's body. Hook velcro secures the pad to straps that have loop on the underside. Sold as a set of two. Each pad is 8.25" long. Features: Fits 2" shoulder straps Tri fold design with holes to accommodate hydration tubes, cables, and antennas 1/4" of padding provides additional comfort Mission adaptable Hook Velcro for anti slide on shoulder strap 8" in length Includes both sides Made in the USA Weight: 2.20 OZ
Designed for the FCPC V5 but also compatible with the Slickster MOLLE Rear Plate Pocket. The ADAPT Drag Handle is the perfect addition to your Ferro Concepts plate carrier. Built from strong materials and designed to distribute the load of dragging, the Drag Handle is adjustable in length and has a 4-way stretch woven sock for comfort. Made in the USA Berry Compliant View Product Guide
